Make Your Own Fishing Pole to save money, the enjoyment of making your own fishing rod, or just for bragging rights with your friends.
How to Make Your Own Fishing Pole
In our post “How to Make Your Own Fishing Pole” to save money, the enjoyment of making your own fishing rod, learning a new DIY skill that may come in handy one day, or just for bragging rights. There are many reasons why you would like to make your own fishing pole.
Hello and thank for joining us here at Fishing Stone. Today we are going to be discussing how to Make Your Own Fishing Pole. This fishing pole will function perfectly, it will have the colors of your choice, with as many rings as you desire. The fishing pole that you will be proud to take fishing anytime and to show off to your friends.
Note: Products links below will take you to Amazon!
Materials You Will Need
In order to get started to make your first fishing rod, we will need the following materials:
- The Fishing Rod – Rod of about 4 ft to 6 ft or as big as you would like it to be
- Fishing Rod Material – Bamboo would work, but you can use any material that will bend easily and not break
- Sewing thread – You can use any colors that you would like. Most people use 3 different colors. You can also use different color fishing line
- Metal Wire – Some pieces of metal wire. Aluminum will probably work or you can I use other materials
- Round Framework – A small piece of PVC or something similar, like a large magic marker
- A Sealer – For this, you can use lacquer or nail polish
Optionally you can pick up a Fishing Pole Making Kit on Amazon that comes with a lot of the parts mentioned above already made for you.
Check Out Our Other Fishing Posts
- Go fishing for exercise and see how it can improve your fitness
- Fishing on a jet ski can be fun and is a great way to learn the basics of fishing from a different angle
- Questions about carp fishing are common. Find answers to the most asked questions here
- Learn how to make perfect fish and chips with crispy chips every single time with this easy recipe
- Getting the right amount of line on your spinning reel is important. Follow this simple guide to load your reel properly
Steps to Make Your Own Fishing Pole
We will begin to make your fishing rod by taking the small piece of PVC tube, or something like it, that has a round shape. We will pass the wire over the PVC in such a way that it looks like a ring when you are done.
After we have acquired the desired round shape, the 2 ends will face away from each other probably sticking out about an inch or two in length. For this fishing pole, we will use 3 rings, two of larger diameters and a smaller one.
These rings are what will hold the fishing line in place and allow us to catch some fish. To fix them in place to the pole, we will put a piece of adhesive tape to fix them, and later, we start to wind it with sewing thread, until they are being held tight.
You don’t have to use several colors, that is totally optional. That is just to give it a better look. I have used different color combinations over the years. Black, Yellow, Red. White, black and green. One time all I had available was a green fishing line, so I just used that.
Putting Together Your Fishing Pole
Once we have all the yarn rolled, we must harden it, and for this, we will use lacquer or nail polish. Make sure the whole thread is covered very well for a stronger bond. To dry it, we can leave it in the sun for a few minutes and then it will harden. Or you can just leave it overnight under a small fan.
Therefore, we have our first ring attached to the base, the second that is placed in the middle of the cane, and the third and smaller, which we will place on the top, letting it protrude a little, we cut the excess of metal, and we do the same process as for the rest.
When you Make Your Own Fishing Pole and have it all together, you will have your very own fishing pole that you have made yourself. To attach the reel you can use the same system that you used to attach the eyes. The only thing is that you will not be able to remove it, without some work afterward.
I have to mention that when you Make Your Own Fishing Pole as a DIY project; do not attempt to catch a lunker with it. This is probably good for small perch, trout and maybe some sun-fish. For serious fishing, a good quality fishing rod would be required.
Thank You For Reading our DIY How To Make Your Own Fishing Pole Post
Thank you for reading our DIY guide on making your own fishing pole. We hope this step-by-step helps you build a solid rod that fits your needs. If you followed along, you now have a custom fishing pole made with your own hands. Remember, practice makes perfect, and you can always improve your skills. Read our other post where we show you how to make your own fishing lures or How to Fix Fishing Pole Tips. Share this guide with friends who love fishing too.
Happy fishing, and good luck on your next trip!
Fishing Stone posts on several sites on Socia Media. By joining us on your favorite ones you can get updates on our latest Fishing Posts.
Find us on Facebook – Twitter – Pinterest – YouTube
Check out our post on some cool fishing gadgets that any fisherman would enjoy! Do not forget any of these things that could ruin your next fishing trip here.
Hope you have fun Fishing every day. Fish On!
Making your own fishing pole can save money, bring fun, and even earn some compliments. It’s a simple way to enjoy fishing more and feel proud of what you built. You don’t need to be an expert—just follow basic steps and get started. Give it a try and see the rewards of creating your own fishing rod today.